What does error code 2 flashes mean on a Heat & Glo gas fireplace?

Low spark voltage (IntelliFire Plus). Not enough voltage from the ignition coil to the pilot igniter.

Can I fix Heat & Glo code 2 flashes myself?

Start with these safe checks: Clear the lockout and try again once. If it keeps happening, the module needs replacing by a qualified tech.

When should I call a technician for code 2 flashes?

If it keeps happening, the module needs replacing by a qualified tech. Smell gas? Leave right away, don't touch light switches or phones inside, and call your gas utility or 911 from outside. Never open a gas valve, burner, gas line, vent or flue connection, or bypass a safety switch. Repeated lockouts, scorching, soot, or a CO alarm mean shut it off and call a licensed gas technician.

Heat & Glo Gas Fireplace Error Code 2 flashes / IPI 2 flashes: Low…

What 2 flashes means

Not enough voltage from the ignition coil to the pilot igniter.

Also shown as: IPI 2 flashes, depending on the model.

Likely causes

Weak ignition module

Safe first checks

Clear the lockout and try again once.

When to stop

If it keeps happening, the module needs replacing by a qualified tech.

Checked against: Hearth & Home Technologies, IntelliFire Plus troubleshooting guide. Codes can differ by model and year, so confirm with your owner's manual.