Can I fix GE Appliances code C5 myself?

Start with these safe checks: Make sure the water supply to the dishwasher is turned on. Tap the float cover in the front left corner of the tub floor to free the float, then try the same cycle again. If it keeps happening, contact service.

When should I call a technician for code C5?

If it keeps happening, contact service. Unplug it or switch the breaker off before you remove any panel. Don't test or replace wiring, control boards, heating elements or motors under power. If you see scorching, smell burning, or the breaker trips again, leave it off and call a qualified appliance technician or electrician.

GE Appliances Dishwasher Error Code C5: Pump-out time too short

What C5 means

The pump-out time was too short, often because too little water came in or the float is stuck.

Likely causes

Water supply turned off
Stuck float

Safe first checks

Make sure the water supply to the dishwasher is turned on.
Tap the float cover in the front left corner of the tub floor to free the float, then try the same cycle again.

When to stop

If it keeps happening, contact service.

Checked against: GE Appliances: Dishwasher - Error, Fault or Function Codes. Codes can differ by model and year, so confirm with your owner's manual.