What does error code C2 mean on a GE Appliances dishwasher?

Drain cycle too long (pump-out over 7 minutes). The total pump-out time went over 7 minutes, which usually points to a drain blockage.

Can I fix GE Appliances code C2 myself?

Start with these safe checks: Press RESET to stop the beeping. Clean the air gap, check the drain hose for kinks and run the disposer, as you would for C1. If the dishwasher still won't drain normally, schedule service. Household drain clogs need a plumber.

When should I call a technician for code C2?

If the dishwasher still won't drain normally, schedule service. Household drain clogs need a plumber. Unplug it or switch the breaker off before you remove any panel. Don't test or replace wiring, control boards, heating elements or motors under power. If you see scorching, smell burning, or the breaker trips again, leave it off and call a qualified appliance technician or electrician.

GE Appliances Dishwasher Error Code C2: Drain cycle too long…

What C2 means

The total pump-out time went over 7 minutes, which usually points to a drain blockage.

Likely causes

Clogged air gap
Kinked drain hose
Blocked disposer or household drain

Safe first checks

Press RESET to stop the beeping.
Clean the air gap, check the drain hose for kinks and run the disposer, as you would for C1.

When to stop

If the dishwasher still won't drain normally, schedule service. Household drain clogs need a plumber.

Parts that may help

Only order a part once the checks above point to it, and match the part number to your model.

Pump Drain Plug - ¼" MPT$12.99

Checked against: GE Appliances: Dishwasher - Error, Fault or Function Codes. Codes can differ by model and year, so confirm with your owner's manual.