What does error code F9E1 mean on a Whirlpool dishwasher?

Long drain. The dishwasher is taking too long to drain.

Can I fix Whirlpool code F9E1 myself?

Start with these safe checks: Remove the filter and clean it under running water. Check the drain hose to the sink for kinks, run the disposer, and on new installs make sure the disposer's knockout plug was removed. Turn the dishwasher's power off for 30 seconds (unplug or breaker), then back on. If it still won't drain, schedule service.

When should I call a technician for code F9E1?

If it still won't drain, schedule service. Unplug it or switch the breaker off before you remove any panel. Don't test or replace wiring, control boards, heating elements or motors under power. If you see scorching, smell burning, or the breaker trips again, leave it off and call a qualified appliance technician or electrician.

Whirlpool Dishwasher Error Code F9E1 / F9 E1: Long drain

What F9E1 means

The dishwasher is taking too long to drain.

Also shown as: F9 E1, depending on the model.

Likely causes

Clogged filter
Kinked or clogged drain hose
Disposer knockout plug not removed
Clogged air gap
Suds from dish soap

Safe first checks

Remove the filter and clean it under running water.
Check the drain hose to the sink for kinks, run the disposer, and on new installs make sure the disposer's knockout plug was removed.
Turn the dishwasher's power off for 30 seconds (unplug or breaker), then back on.

When to stop

If it still won't drain, schedule service.

Checked against: Whirlpool Product Help: F9E1 dishwasher; Whirlpool Product Help: Clean light flashing. Codes can differ by model and year, so confirm with your owner's manual.